At Ringover, a SIP (Session Initiation Protocol) phone is a type of phone that uses the SIP protocol to make and receive calls over the Internet instead of the traditional phone network. These phones can be physical devices similar to conventional office phones or software applications installed on computers, smartphones, or tablets.
Prerequisites:
- You’ll need a SIP phone ☎️ linked to your network
-
This option is available for Smart, Business, and Advanced plans 💳
To take into account:
- This procedure is valid for the Yealink phone model T42S, but the principle is the same for all phones – only the menus will differ.
Step 1: Configure the phone
Press the 🆗 key while the phone is still inactive to obtain its IP address.
Open your computer browser and enter the IP address in the address bar (ex: http://192.168.1.10).
Enter the username 👤 (by default: admin) as well as the password (by default: admin) on the connection page 🔗 and click “Confirm”.
Follow the steps to set up the account: Account > Register > Account 1
- Registry Status: displays the registry status of the current account.
- Active line: you must select Enabled to activate the account.
- Label: displayed on the LCD screen to identify the account.
- Display name: displayed as the caller ID when you make a call.
- Registration name: username (see step 2)
- Username: username (see step 2)
- Password: password (see step 2)
- Host server: server (see step 2)
Step 2: Retrieve your Ringover SIP login information
- 💻 Go to your Ringover Dashboard> Settings> Users
- Click on the user 👨💼 for whom you wish to retrieve Ringover SIP login information
- Under “User settings” you’ll have access to the SIP menu:
You’ll find 3 necessary pieces of information 💬 once your device ☎️ connects to your Ringover user profile:
-
- Server: sip1-us.ringover.com
- Username: username or login
- Password: SIP account password
Enter this information ⌨️ in the corresponding fields in your browser.
Your Ringover account is now configured to your SIP phone! 👌