Bring your own carrier (BYOC) allows you to keep your current phone carrier and use it with Ringover's advanced cloud communication features. In this article, you will learn how to activate this option, interconnect your carrier, and add your numbers.
⚠️ Important: Before taking any activation steps, contact your carrier to verify their compatibility. You must also have administrator rights on Ringover to add a carrier.
1. Activate the BYOC option in the Ringover Marketplace
To start integrating your own carrier:
- Navigate to the Ringover Marketplace.
- Click the "Bring your own carrier (BYOC)" option.
- Confirm the activation of the option.
2. Add a carrier
Once the BYOC option has been activated, you can configure your service provider's information:
- Click "Add a carrier".
- Add your Ringover account information to your service provider.
- Retrieve your service provider's information and add it to Ringover.
- Fill in the requested information with the help of a member of your technical team:
- Carrier's SIP trunk name and SIP trunk
- Carrier username and password
- Select the transport type: TCP, TLS
- Add the carrier's IP address
⚠️ Important: You must be an admin to add a carrier.
💡 Tip: Ask a member of your technical team to validate the SIP trunk parameters and calling prefixes.
3. Add a BYOC number
After configuring your carrier, you can add your phone numbers:
- Go to Configuration > Numbers.
- Click "Add a number".
- Select the carrier you wish to add the numbers to.
- In the "Add number" field, add the desired number.
- Click "Confirm and add numbers" once you have finished typing.
- Confirm the operation in the confirmation message if you are satisfied with the changes.
💡 Tip: Each added line will change the total cost of the operation.
🎉 You now know how to add your BYOC carrier and configure your numbers on Ringover!